Specimen (2) - Annexure (Construction Collaboration Agreement)

-

                           Construction Specifications

1. Scope & General

The following specification and provisions shall be adopted by the Second Party for the construction of Building No. ____________. All materials and workmanship shall conform broadly to CPWD/BIS standards unless otherwise specified and as directed by the Architect / Structural Engineer.

2. Structure

  • The structure shall be a combination of load-bearing and framed construction, earthquake-resistant as per the structural design prepared by the Architect/Structural Engineer.

  • Structural materials, reinforcement, and workmanship must conform to relevant BIS/CPWD specifications.

Main materials (indicative):

  • Cement: 53-grade, ISI-marked (e.g., UltraTech, JK, ACC, Ambuja, Binani).

  • Bricks: First-class, high-quality bricks.

  • Coarse sand: First-class (Badarpur/stone dust as specified).

  • Fine sand: First-class (Yamuna/Jamuna sand), free from dust and organic matter.

  • Stone aggregate: Hard, strong blue-coloured aggregate; 15–20 mm graded size.

  • Steel reinforcement: TMT/TO R bars (Kamdhenu or other ISI-marked), as per structural drawings.

Brickwork & mortar:

  • External/primary walls: 9" thick in cement mortar 1:6 (cement : coarse sand).

  • Partition/internal walls: 4.5" thick in cement mortar 1:4. Use coarse sand. For 4.5" walls, provide 6/8 mm steel bar reinforcement at every sixth course.

Plaster:

  • External/internal walls: cement plaster 1:6 (walls) / 1:4 (ceiling/RCC surfaces) as directed.

3. Foundation & RCC

  • Foundation base: Provide and lay plain cement concrete (PCC) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone) with 20 mm graded aggregate.

  • RCC at columns & plinth: Grade RCC 1:2:4 with suitable reinforcement (ISI-marked TMT bars) as per Structural Engineer’s instruction.

  • RCC slab: Grade RCC 1:2:4 with reinforcement as per structural design.

4. Floor Height & Roofing

  • Clear floor-to-ceiling height: 9'-6" ± 3". Other heights as per local building rules and approved drawings.

  • Roof/Terrace: Top concrete roof slab treated as per design. Provide proper slope, two layers of leveling (approx. 150 mm total where required), 1st-class brick tiles laid on bedding and properly grouted. Provide waterproofing chemicals and finishes as required.

Waterproofing & external treatment:

  • Exposed external walls and terraces must receive quality waterproofing treatments (e.g., Dr. Fixit or similar approved compound), bituminous treatments or equal as specified.

5. Water Supply & Sanitation

  • Pipes: CPVC (ISI marked) for internal distribution; GI for external where specified (e.g., Jindal). Use approved fittings (Unik, Prakash, Supreme).

  • Sewerage: 6" PVC (Metro/Prakash or approved equivalent).

  • Taps & sanitary fittings: Jaguar / Kohler or equivalent. Allow approx. ₹20,000 per bathroom for fittings (subject to type / model).

  • WCs & basins: Parryware / Hindware / Kohler (wall-mounted options as required). Provision mounting limit approx. ₹12,000 per bathroom (adjustable).

  • Bathroom: At least one bathroom with full bath unit and shower panel on each floor.

  • Overhead tank: Sintex double-coated tanks (1,000 L) per floor placed on a cemented platform above terrace level. Terrace is not to be used for tank access except as specified.

  • Pumps: One common submersible pump for the building unless otherwise specified. Separate motors for lifts/parking as required.

  • Kitchen sink: Stainless steel double bowl (ISI mark) — approx. ₹3,000–₹4,000.

  • Water meters: Separate water meters for each floor installed at the stilt/parking area inside an iron meter box with shutter for security.

Other water provisions:

  • Granite counters near wash basins where possible. All bathrooms/kitchens to have three connections: tank (overhead), geyser, and direct (municipal) line. Provide geyser points and plumbing as required.

6. Electrical Works

  • Wiring: ISI-mark cables (e.g., Kalinga) — main line 10 mm²; power points 6 mm² / 4 mm² / 2.5 mm²; general points 1.5 mm² / 1 mm² as per load. Provide proper earthing and TV/telephone points in bedrooms, lobby, and living areas.

  • Switches: Modular (East-West / approved brand).

  • MCBs: Havells (or equivalent).

  • Light fittings: Concealed lights with CFL / LED fittings as per design.

  • Meters: 5 kW (per floor) connection; separate meter for common services (parking, lift, staircase). Elevator to have separate 11 kW connection if required. Meters to be housed in iron boxes with shutters.

  • Video door phone: Provide at each floor with automatic opening of main external gate from each floor (as per design).

  • Conduits: ISI brand conduits.

  • AC/generator/inverter: Provision of points for ceiling fans, exhaust fans, geysers, inverter, and split AC wiring in living/drawing areas.

7. Carpentry & Wooden Works

  • Door frames (Chaukhat): First-quality champ wood (6" x 2.5"), termite-treated.

  • Window frames: Teak/ivory-section frames as per design (3" x 1.5" typical).

  • Shutters: Flush doors with teak ply and teak veneer; thickness 32–35 mm as per design. External windows/doors to have jali / wire mesh as per safety requirements; provide SS wire mesh when required.

  • Almirahs: 8' almirahs in rooms with 19 mm commercial board (ISI), termite proof, teak/laminate finish. Shutter thickness 25 mm with veneer/mica finish. Internal lamination as specified.

  • Locks & fittings: Dorset / Godrej / Plaza / Royal (stainless/chrome/dull finish). Approx. ₹1,200 per set (indicative).

  • Hardware: Stainless steel handles, tower bolts, screws. Provide long chikanis (stays) on doors where required.

8. Gates, Railing & Grills

  • Main gates: Two gates (one small, one large) — SS304 finish with wrought finish as per design.

  • Railings: Front and internal staircase railings in SS304 and glass/wood elements as specified.

  • Iron grills: Provide grills on windows and ventilators facing front/rear — approx. ₹100 per sq. ft. (indicative).

9. Flooring & Finishes

  • Drawing/Lobby/Kitchen: Polished granite — up to approx. ₹100 per sq. ft. (specify grade).

  • Bedrooms/Bathrooms: Granite/tiles — up to approx. ₹150 per sq. ft.

  • Balconies: Front up to ₹100 per sq. ft.; rear up to ₹75 per sq. ft.

  • Stilt parking: Kota/granite flooring; walls with rustic tiles. Staircase: granite up to ₹80 per sq. ft. Kitchen stove slab: high-grade granite approx. ₹200 per sq. ft. (indicative).

10. Kitchen & Appliances

  • Chimney/hood to be provided — approx. ₹15,000 (indicative) for mid-range models. Final appliance selection and cost to be approved by the owner.

11. Ceramic & POP Work

  • Ceramic tiles: Imported tiles up to roof height in toilets — approx. ₹80 per sq. ft. with proper highlight trims.

  • POP: POP plaster and false ceilings in drawing room, lobby, bedrooms, and kitchen per the design.

12. Paint & Polish

  • Internal walls (drawing/dining/lobby): Velvet/smooth finish with quality base coats and texture as selected.

  • Other internal areas: Plastic emulsion finishes. Melamine finish for woodworks. Feature wall with texture paint or wallpaper — approx. ₹30–₹40 per sq. ft.

13. Passenger Lift

  • Make/Model: Otis / Kone / Schindler / Johnson (or equivalent) — automatic doors, 4–5 passenger capacity with Automatic Rescue Device (ARD). Exact model to be decided per lift load and shaft dimensions.

14. Miscellaneous & Safety

  • Provide MS safety jali at rear courtyard and a covered area for washing (tiled). Bathroom doors internally to be fitted with sun mica matching the tiles. Exterior window shades to protect from rain. All interiors/exteriors to be executed according to A-2/137, Paschim Vihar approved drawings.

15. Quality Assurance & Testing

  • All materials must be ISI/BIS certified where required. Carry out material testing (cement, steel, aggregates) as per the Structural Engineer’s schedule. Maintain test certificates and quality logs on site.

16. Approvals, Permits & Statutory Compliance

  • The Second Party shall obtain all statutory approvals and comply with municipal/DTP/DDA/other regulatory approvals as required. Any variation in local rules or additional charges will be communicated and accounted for as a variation.

FAQ (Frequently Asked Questions) 

  1. Q: What is included in this specification?
    A: This document lists materials, workmanship standards, plumbing and electrical details, finishes, waterproofing, and other construction practices to be followed for Building No. __________. It is a minimum standard; the Architect/Structural Engineer’s drawings and specifications take precedence.

  2. Q: Can I change finishes or brands?
    A: Yes. Finishes and approved brands can be upgraded or substituted subject to written approval. Cost differences due to upgrades will be treated as a variation and billed separately.

  3. Q: Who is responsible for statutory approvals and permits?
    A: As stated, the Second Party (contractor/builder) shall obtain required statutory approvals unless otherwise agreed in writing. Any fees or delays from statutory bodies are handled according to the contract terms.

  4. Q: What warranties are provided on work and materials?
    A: Warranties depend on manufacturer guarantees (e.g., sanitaryware, tanks, pumps) and workmanship warranties as specified in the contract. Typical workmanship defects liability is for 12 months unless otherwise stated.

  5. Q: How are variations/extra works handled?
    A: Variations must be approved in writing, with costs and time impacts estimated and agreed before execution.

  6. Q: What quality checks are performed?
    A: Material testing (cement, steel, aggregates), periodic inspections, and sign-offs at major stages (foundation, plinth, lintel, RCC, finishing) are part of the QA process.

  7. Q: How long will construction take?
    A: Time depends on the approved drawings, statutory approvals, and scope. Provide your project details to receive a tailored timeline; typical multi-storey builds vary widely (projected schedule provided after site assessment).

  8. Q: How do I request a quote or discuss collaboration?
    A: Use the contact form on our collaboration landing page, call/WhatsApp [your number], or email delhiplotsbuilders@gmail.com. We provide a free 15-minute consultation and a one-page feasibility note for qualified plots.

  9. Q: Are these costs fixed?
    A: The listed approximate costs (e.g., fittings and flooring ranges) are indicative. Final rates will be provided in the formal estimate and are subject to market price changes for materials and labor.

  10. Q: What safety measures are included?
    A: The specification requires MS safety jalis, proper railing standards, compliance with seismic design where applicable, and adherence to local safety and fire norms.


Building <a target="_blank" href="https://www.google.com/search?ved=1t:260882&q=Construction+Collaboration+Delhi+NCR&bbid=8447178183220094962&bpid=728698136070056713" data-preview>Construction Collaboration</a> in Delhi NCR | <a target="_blank" href="https://www.google.com/search?ved=1t:260882&q=Delhi+Plots+Builders&bbid=8447178183220094962&bpid=728698136070056713" data-preview>Delhi Plots Builders</a>

Building Construction Collaboration in Delhi NCR

Delhi Plots Builders | delhiplotsbuilders@gmail.com | +91 98180 18725

About Our Collaboration Model

Delhi Plots Builders specializes in Construction Collaboration in Delhi NCR. Property owners provide their plot, and we bring in our expertise, resources, and network to construct high-quality buildings. The final units are shared between owner and builder as per a transparent, legally binding agreement.

Why Collaborate With Us?

  • ✅ Strong legal background – every agreement is watertight.
  • ✅ 20+ years of property dealing and construction experience.
  • ✅ Transparent process – no hidden terms.
  • ✅ Focus on high-value areas like Paschim Vihar, Punjabi Bagh, Pitampura, Janakpuri.

Get Started Today

Partner with us for safe, profitable, and timely construction collaboration in Delhi NCR.

Call/WhatsApp: +91 98180 18725

Contact Form

Frequently Asked Questions

What is Construction Collaboration?

It is a joint venture where you provide the plot and we provide construction expertise, sharing the developed property as per agreement.

What areas do you cover?

We work across Delhi NCR, with focus on Paschim Vihar, Punjabi Bagh, Pitampura, Janakpuri, and similar high-value localities.

Is my investment safe?

Yes. Agreements are legally binding, and our track record ensures transparency and security.

Location: Paschim Vihar, Delhi, India

Comments

Post a Comment